PET Blow Molding Machine/Automatic Blow Molding Machine/PET Blow Molding Machine

PET Bottle Blowing Machine / Automatic Bottle Blow Moulding Machine / PET Bottle Making Machine BM-A6 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-

Featured Products

PET Bottle Blowing Machine / Automatic Bottle Blow Moulding Machine / PET Bottle Making Machine
 
BM-A6 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.

Equipment List:
No.NAMEMODELPOWERQUANTITY
1Blow Molding MachineBM-A656KW1set
2HP Air Compressor 6.0m3/min/30Kg66KW1set
3LP Air Compressor1.6 m3 /min/10Kg15KW1set
4Cold dryer(HP)6.0 m3/min/30Kg2KW1set
5Cold dryer(LP)2.0 m3/min/10Kg0.45KW1set
6Air Tank1m3/min/30Kg/1set
7Mold Chiller5HP4.4KW1set
8High-pressure oil pipe  15m
9Bottle mold0.2-2L6cavities/1set
10Spare parts  1set
11Installation tools  1set

Pet Bottle Blowing Machine / Automatic Bottle Blow Moulding Machine / Pet Bottle Making Machine
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Use SMC air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
Technical parameters:
ItemBM-A6L
Bottle type specificationCavity6
Theory output5000-6000
Max.volume2L
Bottle mouth maximum overall diameter28-38mm
Bottle biggest diameter100mm
Bottle maximum height330mm
Power specificationsLight tube quantity32pcs
Light tube power1.5KW
Maximum heating power48KW
All electric machine installation55KW
Actual consumption20KW
Blow bottle pressure25-35kg/c
Higher -pressure gas consumption4000Ltr/min
Forzen water specificationWork pressure5-6 kg/c
Temperature range10ºC
Consumption8000kcal/hr
Forzen water flow88L/min
Machine specificationSize of the machine6.5x1.5x1.9
Weight of the machine4ton
 
Main parts:
NameBrandOriginal
CylinderSMCJapan
valveSMCJapan
Photoelectric switchXINCHINA
Touch screenMCGSCHINA
PLCMitsubishiJapan
TransducerSMCJapan
servo motorHUICHUANGCHINA
 
Free spare part list:
NUMBERNAMEQTY/SET
1Lamp10
2Seal ring10
3Tool box1
4stop button1
5starting switch1
6connector20
7Detection switch1
8Magnetic switch4
9Pressure regulating table1
10Temperature control module2
Pet Bottle Blowing Machine / Automatic Bottle Blow Moulding Machine / Pet Bottle Making Machine
Fuctions of the accessory machines:

Air compressor
is the air source for PET stretch blow molding machine, carrying out the process of compressing air from atmosphere to the required pressure.

Air dryer is to remove the moisture from the compressed air and lower temperature of the compressed air in the heat exchanger.

Air filter is to clear up the impurities out of the compressed air, like carbon hydrogen, tiny dust and solid particles.

Air tank is to keep the air stable ,to protect the Hp air compressor.
 
Water Chiller is to Cool the mould ,to prolong the life of the mould.


Pet Bottle Blowing Machine / Automatic Bottle Blow Moulding Machine / Pet Bottle Making Machine

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours