200ml 500ml 1L 2L 5L 10L 5gallon Plastic Pet Bottle Blow Molding Machine

Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallonDescription PET Bottle Blowing Machine(0.2-2L bottle) is suitable for producing PET plastic containers and bottles from 0.01-25L. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle

Featured Products

Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon

Description

 

PET Bottle Blowing Machine(0.2-2L bottle) is suitable for producing PET plastic containers and bottles from 0.01-25L. It is widely used to produce the carbonated bottle, mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.

 

Features

 

1). Automatic preform conveyer to save human cost.

2). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.

3). Introduce the FESTO air cylinder to avoid contamination and noise.

4). Strong clamping force with high pressure and double crank links to lock the mould.

5). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.

6). Ideal cooling system make the finished bottles without any flaws.

7). Low rejection rate: less than 0.2 percent.

Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon
Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon
Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon
Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon


Parameter

 

ModelItemZG-2ZG-4ZG-6
ProductivityDepend on bottle design1800-2000PCS/H3200-4000PCS/H4000-5500PCS/H
Product typeVolume0.1-2.0L0.1-2.0L0.1-2.0L
Body diameter≤100mm≤100mm≤100mm
Height≤310mm≤310mm≤330mm
Neck diameter≤38mm≤38mm≤38mm
MoldCavity246
Mold thickness240mm240mm240mm
Mold volume260*240*370mm510*240*360mm640*240*360mm
Main machine powerElectrical source power380V/220V 50/60HZ380V/220V 50/60HZ380V/220V 50/60HZ
 3Phase3Phase3Phase
Rated power25kw49kw73kw
Really use power6.5kw13kw25kw
Air systemHP air compressor1.6m³/min3.0Mpa3.0m³/min3.0Mpa6.0m³/min3.0Mpa
LP air compressor1.0m³/min1.0Mpa1.6m³/min1.0Mpa2.0m³/min1.0Mpa
Air tank0.6m³3.0Mpa0.6m³3.0Mpa1.0m³3.0Mpa
Air dryer1.0m³/min3.0Mpa2.0m³/min3.0Mpa6.0m³/min3.0Mpa
Cooling waterWater Chiller3HP3HP5HP
MachineSize(L*W*H)1900*1280*1930mm1900*1860*1930mm4100*1400*1800mm
Weight2000kg3200kg3600kg
Preform unscramblerSize(L*W*H)2000*950*2480mm2000*950*2480mm2000*950*2480mm
Weight250kg250kg250kg

 

Raw material

Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon
Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon



12g 16g 21g 32g 108g 250g 650g PET preform for water/juice bottle

We offers various PET preforms suiting different contents and production processes. Our Cold-Filling products can be applied to water-filling, aseptic-filling, and CSD-filling production. Hot-Filling products are suitable for hot-filling, pasteurization, and sterilization. Crystalized for Hot-Fill can resist up to 92° C (197° F) while Non-Crystallized for Hot-Fill can resist up to 88° C (190° F).

1.100% Virgin PET Resin
2. High transparency
3. High toughness
4. Blowing rate up to 99.7-99.8%
5. Low defect rate
6. Wide range of neck and weight preforms for your choice
7. Different colors is workable
8. Open new molds with low cost and less time
9. On time delivery
10. Competitive price & High quality(hot runner system preform mold)

PET bottles made by PET preform,there is strong applicability and are widely used in daily necessities, daily chemical packaging and other fields. From die processing to machine and equipment, it is very picky, easy to get started and difficult to do. PET bottle blanks are re-processed by blow moulding to form plastic bottles, including bottles used for packaging cosmetics, medicine, health care, beverages, mineral water, reagents, etc. This method is called two-step method, that is, the method of forming bottle blanks by injection moulding and then forming PET plastic bottles by blow moulding.
 

Neck(mm)Weight(gram)
2613g,14g,16g,18g
28 PCO 181016g,18g,20g,21g,25g,28g,32g,35g,38g,42g,45g,52g,58g,63g
28 PCO 188116g,18g,21g,25g,32g,35g,52g
3014g,16g,17g,18g,20g,21g,24g,26g,28g,30g,32g,36g,38g,42g,45g,50g
30 PCO 292514g,16g,28g,30g
3816g,18g,20g,25g,28g,30g,38g,42g,50g,52g,70g,75g,80g
4570g,75g,90g,95g,100g,110g,115g,120g,130g,136g,145g,150g,180g
4888g,93g,95g,105g,150g,180g
55350g,550g,600g,630g,650g,680g,700g,730g,750g,800g


Shipping

Plastic Pet Bottle Blowing Mold Machine for 200ml 500ml 1L 2L 5L 10L 5gallon


How Can I Visit Your Factory?

 

A: Our factory location:Zhenbei Road, Leyu Town, Zhangjiagang City, Jiangsu Province, China.
Contact: MOB  : 0086 13584426100 (Vickie Sun)
Nearest train station: Wuxi Station / Wuxi East Station
Nearest international airport: Shanghai Pudong International airport (PVG) / Shanghai Hongqiao International airport (SHA) / Wuxi Shuofang airport (if you are already in China)

 

Q: How to can appropriate offer?

 

A: Please inform us below conditions to get the appropriate offer quickly:

1, What kind of product you will produce? Water, juice, carbonated drink, beer, ketchup or another?

2, What is your production capacity per hour / per day / per month?

3, What is your bottle types and cap types? Glass bottle, PET bottle, Aluminum can or another? And How many bottle types that you have?

4, What is the final labeling and packing manner?

 

Contact us

 

Contact person: Vickie Sun

MOB : 0086 13584426100

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours